...
CNC de Occidente
Maquinaria CNC
TORNOS CNC
Torno CNC Kitamura
Torno CNC Kitamura
TORNO CNC Mori Seiki CL 20
En muy buenas condiciones
Specifications
Year 1995
Control Fanuc 18 TA
Bar Work Capacity: 2.5" /60MM
Maximum Turning Diameter: 16.2" /400mm
Maximum Turning Length: 11.3" /250mm
Max. Swing Over Bed: 20.3" /500mm
X-Axis Travel: 12.2" /350mm
Z-Axis Travel: 9.25" /250mm
Spindle Speeds: 4,000 RPM
Spindle Nose: A2-6
Spindle Bore: 3"
Spindle Motor: 10 HP
Number of Tool Stations: 10
Turret Index Time: 0.7 Seconds
Rapid Traverse Rate (X&Z): 1181 IPM
Torno CNC Hardinge Cobra 42
Torno CNC Hardinge Cobra 42
TORNO CNC Hardinge cobre 42
GE Fanuc 21-T 32 Bit CNC Control
CATALOGUE SPECIFICATIONS:
Max Swing Over Bed.................... 21"
Max OD Turning Capacity w/Standard Tooling............. 8.25"
Max Machinable Center Distance.......... 14"
Cross Travel (X-Axis)......................... 7.75"
Longitudinal Travel (Z-Axis).................... 14"
Rapid Traverse Rate (X-Axis)........... 400 IPM
Rapid Traverse Rate (Z-Axis).......... 630 IPM
Number of Turrets....................................... 1
Tool Positions.......................................... 12
Spindle Bore............................................1.625"
Barstock Capacity Diameter.................. 1.625"
Spindle Speed Range (1 RPM Increments).......... 50-5000 RPM
Spindle Horsepower............................ 7.5 HP
Approximate Machine Dimensions.... 86" x 67"
Approximate Machine Height.............................. 70"
Approximate Machine Weight......... 6,000 LBS
Torno Cnc Haas HL-2
Chuck Size 8" Hydraulic
Maximum Swing Over Apron 20"
Max. Cutting Diameter 10"
Swing Over Cross Slide 9.5"
Max. Machining Length 20"
X-Axis Travel 8.6"
Z-Axis Travel 20"
Spindle Nose / Bore A2 - 6" / 3"
Spindle Speed up to 3750 RPM
Spindle Motor 15 HP
Turret Type 10 Position Turret
Rapid Traverse 500 IPM
Tailstock Taper MT # 4
Machine Dimensions 9'5 x 6' x 6'
Machine Weight 9,000 Lbs
Equiped with
8" 3 Jaw Hydraulic Chuck
Tailstock
RS 232 Port Interface
Torno Cnc Daewoo Puma 10S
Daewoo Puma 10 Fanuc 10T año 1988
Specification Description
CHUCK SIZE 10"
MAX SWING OVER BED 22.8"
MAX TURNING DIAMETER 12.5"
SPINDLE MOTOR 20 HP
BAR CAPACITY 2.5"
SPINDLE SPEED 3,150 RPM
NUMBER OF TOOL STATIONS 12 STATIONS
MACHINE WEIGHT 14,200 LBS
MACHINE DIMENSIONS 125" x 74" x 79"
Specification
Fanuc OT
Capacities:
Distance Between Centers 28.54"
Max. Swing Over Bed 21.26"
Spindle:
Front Bearing (ID) 5.12"
Hole Thru Spindle 3.43"
Chuck Diameter 10"
Bar Capacity 2.85"
Spindle Motor 20/25 HP
Turret:
Number of Stations 12
Clamping Force 5917.5 Lbs.
Shank Height/Squaretool 1"
Shank Dia. of Boring Bar 1-3/4"
X-Axis Travel 6.5"
Z-AxisTravel 24.8"
Tailstock:
Quill Diameter 2.95"
Quill Travel 3.94"
Quill Taper MT#5
Equipped With:
Fanuc CNC Control fanuc 10T, Tail Stock,